This is 5mm diameter, diffused RGB LED, with common cathode pin. So basically 3 pins are dedicated for Red, Green, Blue light control respectively, while the last pin is the cathode pin for all three color.
This is a 1602 serial alphanumeric LCD with white characters on a blue backlight display. With AIP31068L driver IC, it only needs a 3.3V power supply to work. To ease your way, the header pin is pre-soldered. This LCD display works with a wide range of boards including the Microbit, Pi PICO and MakerUNO X.
RC servo motor is very popular in RC (Radio Control), and now it is widely used in robotics. Yet, as many of you may already know, standard RC Servo cannot rotate continuously, there is a limit of around 270º (or 180º). It is not suitable for mobile robots that need continuous rotation. The problem is solved with this tiny modified…
Brushed motor is the most widely used motor because it is easy to use. Just supply the two terminals with DC power, the motor will start rotating! If you want to control its speed and direction using a controller, usually you will use an L298N Motor Driver. But if you want an easy and beginner-friendly motor driver, you are on…
Everyone loves the 1602 character LCD, it is cheap and works out of the box! But the need for 6 to 10 GPIOs can be a problem as it takes most of GPIO of Arduino and other microcontroller. Now with this I2C or Two wires interface LCD, you will save a lot of GPIO for your sensor and motor control.
This is a?low-cost plastic gear RC servo with 1.80kg.cm holding torque (at 4.8V). It is a?perfect solution for student robotic projects who build arms or linkages.? The advantage of RC servo over the DC brush motor is the ability to control its rotation angle.
PLEASE NOTE: BULK DISCOUNTS AND KIT CUSTOMIZATIONS ARE AVAILABLE FOR SCHOOLS! Contact us directly for more information Arduino is one of easiest platform to learn digital making. However, many students, as well as the teachers, still find it is difficult to get started and get familiar with Arduino. This could be due to two reasons: Most of the students and…
This website uses cookies to improve your experience and display customized content. Set your cookie preferences or read our cookie policy here. AcceptRejectRead More
